User manual TEXAS INSTRUMENTS TMS320C5504 DATASHEET 08-2010

[. . . ] TMS320C5504 www. ti. com SPRS659B ­ AUGUST 2010 ­ REVISED AUGUST 2010 TMS320C5504 Fixed-Point Digital Signal Processor Check for Samples: TMS320C5504 1 Fixed-Point Digital Signal Processor 1. 1 12 Features ­ Software-Compatible With C55x Devices ­ Industrial Temperature Devices Available 256K Bytes Zero-Wait State On-Chip RAM, Composed of: ­ 64K Bytes of Dual-Access RAM (DARAM), 8 Blocks of 4K x 16-Bit ­ 192K Bytes of Single-Access RAM (SARAM), 24 Blocks of 4K x 16-Bit 128K Bytes of Zero Wait-State On-Chip ROM (4 Blocks of 16K x 16-Bit) 4M x 16-Bit Maximum Addressable External Memory Space (SDRAM/mSDRAM) 16-/8-Bit External Memory Interface (EMIF) with Glueless Interface to: ­ 8-/16-Bit NAND Flash, 1- and 4-Bit ECC ­ 8-/16-Bit NOR Flash ­ Asynchronous Static RAM (SRAM) ­ 16-bit SDRAM/mSDRAM (1. 8-, 2. 5-, 2. 75-, and 3. 3-V) Direct Memory Access (DMA) Controller ­ Four DMA With 4 Channels Each (16-Channels Total) Three 32-Bit General-Purpose Timers ­ One Selectable as a Watchdog and/or GP Two MultiMedia Card/Secure Digital (MMC/SD) Interfaces Universal Asynchronous Receiver/Transmitter (UART) Serial-Port Interface (SPI) With Four Chip-Selects Master/Slave Inter-Integrated Circuit (I2C BusTM) Four Inter-IC Sound (I2S BusTM) for Data Transport · HIGHLIGHTS: · High-Perf/Low-Power, C55xTM Fixed-Point DSP ­ 16. 67/13. 33/10/8. 33/6. 66-ns Instruction Cycle Time ­ 60-, 75-, 100-, 120-, 150-MHz Clock Rate · 256K Bytes On-Chip RAM · 16-/8-Bit External Memory Interface (EMIF) · Two MultiMedia Card/Secure Digital I/Fs · Serial-Port I/F (SPI) With Four Chip-Selects · Four Inter-IC Sound (I2S BusTM) · USB 2. 0 Full- and High-Speed Device · Real-Time Clock (RTC) With Crystal Input · Four Core Isolated Power Supply Domains · Four I/O Isolated Power Supply Domains · One Integrated LDO · Industrial Temperature Devices Available · 1. 05-V Core, 1. 8/2. 5/2. 75/3. 3-V I/Os · 1. 3-V Core, 1. 8/2. 5/2. 75/3. 3-V I/Os · 1. 4-V Core, 1. 8/2. 5/2. 75/3. 3-V I/Os · FEATURES: · High-Performance, Low-Power, TMS320C55xTM Fixed-Point Digital Signal Processor ­ 16. 67-, 13. 33-, 10-, 8. 33-, 6. 66-ns Instruction Cycle Time ­ 60-, 75-, 100-, 120-, 150-MHz Clock Rate ­ One/Two Instruction(s) Executed per Cycle ­ Dual Multipliers [Up to 200, 240, or 300 Million Multiply-Accumulates per Second (MMACS)] ­ Two Arithmetic/Logic Units (ALUs) ­ Three Internal Data/Operand Read Buses and Two Internal Data/Operand Write Buses · · · · · · · · · · · 1 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. Copyright © 2010, Texas Instruments Incorporated UNLESS OTHERWISE NOTED this document contains PRODUCTION DATA information current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. TMS320C5504 SPRS659B ­ AUGUST 2010 ­ REVISED AUGUST 2010 www. ti. com · Device USB Port With Integrated 2. 0 High-Speed PHY that Supports: ­ USB 2. 0 Full- and High-Speed Device · Real-Time Clock (RTC) With Crystal Input, With Separate Clock Domain, Separate Power Supply · Four Core Isolated Power Supply Domains: Analog, RTC, CPU and Peripherals, and USB · Four I/O Isolated Power Supply Domains: RTC I/O, EMIF I/O, USB PHY, and DVDDIO · One integrated LDO (ANA_LDO) to power DSP PLL (VDDA_PLL) · Low-Power S/W Programmable Phase-Locked Loop (PLL) Clock Generator · On-Chip ROM Bootloader (RBL) to Boot From NAND Flash, NOR Flash, SPI EEPROM, SPI Serial Flash or I2C EEPROM · IEEE-1149. 1 (JTAGTM) Boundary-Scan-Compatible · Up to 26 General-Purpose I/O (GPIO) Pins (Multiplexed With Other Device Functions) · 196-Terminal Pb-Free Plastic BGA (Ball Grid Array) (ZCH Suffix) · 1. 05-V Core (60 or 75 MHz), 1. 8-V, 2. 5-V, 2. 75-V, or 3. 3-V I/Os · 1. 3-V Core (100, 120 MHz), 1. 8-V, 2. 5-V, 2. 75-V, or 3. 3-V I/Os · 1. 4-V Core (150 MHz), 1. 8-V, 2. 5-V, 2. 75-V or 3. 3-V I/Os · Applications: ­ Wireless Audio Devices (e. g. , Headsets, Microphones, Speakerphones, etc. ) ­ Echo Cancellation Headphones ­ Portable Medical Devices ­ Voice Applications ­ Industrial Controls ­ Fingerprint Biometrics ­ Software Defined Radio · Community Resources ­ TI E2E Community ­ TI Embedded Processors Wiki 2 Fixed-Point Digital Signal Processor Submit Documentation Feedback Product Folder Link(s): TMS320C5504 Copyright © 2010, Texas Instruments Incorporated TMS320C5504 www. ti. com SPRS659B ­ AUGUST 2010 ­ REVISED AUGUST 2010 1. 2 Description The device is a member of TI's TMS320C5000TM fixed-point Digital Signal Processor (DSP) product family and is designed for low-power applications. [. . . ] 7 signals of the SPI module, 6 GPIO signals, 4 signals of the UART module and 4 signals of the I2S2 module are routed to the 21 external signals of the parallel port. 4 signals of the SPI module and 4 signals of the I2S3 module are routed to the 21 external signals of the parallel port. 4 signals of the I2S2 module and 4 signals of the UART module are routed to the 21 external signals of the parallel port. 4 signals of the SPI module and 4 signals of the UART module are routed to the 21 external signals of the parallel port. 7 signals of the SPI module, 4 signals of the I2S2 module, 4 signals of the I2S3 module, and 6 GPIO are routed to the 21 external signals of the parallel port. The bits control the pin multiplexing of the I2S1 and GPIO pins on serial port 1. For more details, see Table 4-5, MMC1, I2S1 , and GP[11:6] Pin Multiplexing. 4 signals of the I2S1 module and 2 GP[11:10] signals are routed to the 6 external signals of the serial port 1. 6 GPIO signals (GP[11:6]) are routed to the 6 external signals of the serial port 1. The bits control the pin multiplexing of the MMC0, I2S0, and GPIO pins on serial port 0. For more details, see Section 4. 7. 1. 3, MMC0, I2S0, and GP[5:0] Pin Multiplexing. All 6 signals of the MMC/SD0 module are routed to the 6 external signals of the serial port 0. 4 signals of the I2S0 module and 2 GP[5:4] signals are routed to the 6 external signals of the serial port 0. 6 GPIO signals (GP[5:0]) are routed to the 6 external signals of the serial port 0. 11 = Reserved. 14:12 PPMODE 11:10 SP1MODE 9:8 SP0MODE 50 Device Configuration Submit Documentation Feedback Product Folder Link(s): TMS320C5504 Copyright © 2010, Texas Instruments Incorporated TMS320C5504 www. ti. com SPRS659B ­ AUGUST 2010 ­ REVISED AUGUST 2010 Table 4-3. EBSR Register Bit Descriptions (continued) BIT 7 6 5 NAME RESERVED RESERVED A20_MODE DESCRIPTION Reserved. This bit controls the pin multiplexing of the EMIF address 20 (EM_A[20]) and general-purpose input/output pin 26 (GP[26]) pin functions. This bit controls the pin multiplexing of the EMIF address 19 (EM_A[19]) and general-purpose input/output pin 25 (GP[25]) pin functions. This bit controls the pin multiplexing of the EMIF address 18 (EM_A[18]) and general-purpose input/output pin 24 (GP[24]) pin functions. This bit controls the pin multiplexing of the EMIF address 17 (EM_A[17]) and general-purpose input/output pin 23 (GP[23]) pin functions. For more details, see Table 4-6, EM_A[20:16] and GP[26:21] Pin Multiplexing. This bit controls the pin multiplexing of the EMIF address 16 (EM_A[16]) and general-purpose input/output pin 22 (GP[22]) pin functions. [. . . ] In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 PACKAGE OPTION ADDENDUM www. ti. com 1-Sep-2010 Addendum-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. [. . . ]