User manual TIMEX T307

[. . . ] Model T307 Preset Tuning Clock Radio with MP3 line-in and Nature Sounds CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK OF UNIT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead in an equilateral triangle is intended to alert the user of the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The symbols above are located at the back of the cabinet. CAUTION: To prevent electric shock, match wide blade of plug to wide slot. Introduire la lame la plus large de la fiche dans la borne correspondante de la prises et pousser jusqu'au fond. This device complies with part 15 of the FCC Rules. [. . . ] Find your time zone, then press the 4 Enter Button or wait about ten seconds for the clock to beep twice and the setting to lock into place. Manual Time and Date Settings 1. To change your time setting, press and hold the J Time Set Button so that the clock display begins flashing. While the display flashes, press the 1 Reverse and 6 Forward Buttons to set the time. After setting the time, press the 4 Enter Button or wait about ten seconds for the clock to beep twice and the setting to lock into place. To change the calendar, press and hold the 9 Date/7-5-2 Button until the display shows the flashing year. When you have selected the year, press the 4 Enter Button, then use the 1 Reverse and 6 Forward Buttons to set the month/day. After you have set the date, press the 4 Enter Button or wait for the display to beep twice and lock into place. 7 Operating the Dual Alarm System This clock radio features a dual alarm system, with two alarms that can be operated independently. The alarms can be set to wake two people at different times, or to have a main alarm and a backup. One alarm features your choice of radio stations as an alarm wake sound, while the second features a nature sound or buzzer as an alarm wake sound. You can set the radio alarm, the nature sound/buzzer alarm, or both alarms. If you do not begin setting the time within ten seconds of pressing the button, the display will stop flashing and you will need to press the 2 Radio Alarm 1 Button again. While the display flashes, press the 1 Reverse and 6 Forward Buttons to set the wake time. After setting the radio alarm time, while the display is still flashing you will need to select the station. For more information on programming radio stations into memory, see the Programming Radio Station Settings section of this manual. After setting the radio alarm wake time and sound, you will need to select the 7-5-2 setting. The 7-5-2 setting lets you set the alarm for a full week, weekdays only, or the weekend. Before setting the alarm, be sure that the correct date is set, as shown in the "Auto-Set" and Manual Time and Date Settings section of the manual. While the display is still flashing, press the 9 Date/7-5-2 Button until the desired setting is shown. After you have set the radio alarm wake time, sound, and 7-5-2 setting, press the 4 Enter Button. The Radio Alarm Indicator will appear on the display, showing that the radio alarm has been set. · Press and hold the L Mode/DST Button for 5 seconds to turn "DST" on. · Press and hold the L Mode/DST Button for 5 seconds again to cancel the "DST" function and restore to standard time. Adjusting the Display Backlight · This alarm clock radio features an adjustable display backlight, with dim, medium, and bright settings. [. . . ] Press the 3 Off/Reset Button to turn off the nature sounds before the sleep time has elapsed. Note: To see the number of minutes remaining on the sleep timer, press the N Power/Sleep Button once. The display will show the Sleep Time for approximately ten seconds before returning to the normal mode. Listening and Sleeping to the AUX-IN Device 1. Connect your MP3, Discman or other device into the P AUX Jack located on the right side of the unit with mini plug cord. [. . . ]