User manual TOSHIBA SATELLITE C660D
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual TOSHIBA SATELLITE C660D. We hope that this TOSHIBA SATELLITE C660D user guide will be useful to you.
You may also download the following manuals related to this product:
TOSHIBA SATELLITE C660D (3231 ko)
TOSHIBA SATELLITE C660D (3378 ko)
TOSHIBA SATELLITE C660D (3324 ko)
TOSHIBA SATELLITE C660D (3221 ko)
TOSHIBA SATELLITE C660D (3237 ko)
TOSHIBA SATELLITE C660D (3237 ko)
TOSHIBA SATELLITE C660D (3227 ko)
TOSHIBA SATELLITE C660D (3237 ko)
TOSHIBA SATELLITE C660D (3048 ko)
Manual abstract: user guide TOSHIBA SATELLITE C660D
Detailed instructions for use are in the User's Guide.
[. . . ] If you have suggestions regarding the content of this guide, send an e-mail with the subject "Service Guide Comments" to channel. services@gateway. com.
© 2002 Gateway, Inc. Gateway, Gateway Country, the Gateway stylized logo, and the black-and-white spot design are trademarks or registered trademarks of Gateway, Inc. All other brands and product names are trademarks or registered trademarks of their respective companies.
www. gateway. com
1
Replacing Components in Your Gateway SATELLITE C660D
Identifying components
Where screw measurements are shown, the first number indicates screw head width, and the second number indicates screw length. For a complete list of replaceable parts, see the Contents.
LCD panel assembly (see page 33)
Keyboard cover (see page 24) Keyboard (see page 26)
Palm rest assembly (see page 39)
Cooling assembly (see page 44)
System board (see page 59)
2
www. gateway. com
Preparing your work space
Preparing your work space
Before performing maintenance on your notebook, make sure that your work space and your notebook are correctly prepared.
I I
Wear a grounding (ESD) wrist strap, and use a grounded or dissipative work mat. [. . . ] (The screw cannot be removed. )
Screw
18
www. gateway. com
Replacing the hard drive kit
4
Lift the screw side of the cover upward, then slide the cover out.
5
Pull on the metal flange to disconnect the hard drive kit from the connector.
Flange
www. gateway. com
19
Replacing Components in Your Gateway SATELLITE C660D
6
Lift the plastic tab on the hard drive kit, then lift the kit out of your notebook.
Tab
7
Place the new hard drive kit into the drive bay, then slide the drive onto the connector.
8
Replace the cover and tighten the screw.
20
www. gateway. com
Replacing the hard drive in the hard drive kit
Replacing the hard drive in the hard drive kit
Tools you need to complete this task:
Phillips #0 screwdriver
Screws removed during this task:
4 chrome 3 × 3. 5 mm (hard drive)
To install a new hard drive into the kit:
1 2
Disconnect the power cord, remove the main and optional secondary battery, and prepare your notebook by following the instructions in "Preparing your work space" on page 3. Remove the hard drive kit by following the instructions in "Replacing the hard drive kit" on page 18.
www. gateway. com
21
Replacing Components in Your Gateway SATELLITE C660D
3
Remove the four screws that secure the hard drive to the hard drive kit bracket.
Screw
Screw
Bracket
Screw
Screw
4
Remove the old drive from the bracket.
22
www. gateway. com
Replacing the hard drive in the hard drive kit
5
Insert the new drive into the bracket so the screw holes line up, then replace the four screws that secure the drive to the bracket.
Screw
Screw
Bracket
Screw
Screw
6
Place the new hard drive kit into the drive bay, then slide the drive onto the connector.
7
Replace the cover and tighten the screw.
www. gateway. com
23
Replacing Components in Your Gateway SATELLITE C660D
Replacing the keyboard cover
Tools you need to complete this task:
Flat-blade screwdriver
To replace the keyboard cover:
1 2 3
Disconnect the power cord, remove the main and optional secondary battery, and prepare your notebook by following the instructions in "Preparing your work space" on page 3. Be careful not to damage the LCD panel.
Tabs
10 11 12
Carefully press the keyboard down until it is flat all the way across. If a grounding strap that was connected to the far-right screw, make sure to reconnect it. Reassemble your notebook.
30
www. gateway. com
Replacing the hinge covers
Replacing the hinge covers
Tools you need to complete this task:
Phillips #0 screwdriver
Flat-blade screwdriver
Screws removed during this task:
4 chrome 2. 5 × 5 mm (hinge covers)
To replace the hinge covers:
1 2 3
Disconnect the power cord, remove the main and optional secondary battery, and prepare your notebook by following the instructions in "Preparing your work space" on page 3. Remove the keyboard cover by following the instructions in "Replacing the keyboard cover" on page 24. Open the LCD panel all the way, so it lies flat on the table.
www. gateway. com
31
Replacing Components in Your Gateway SATELLITE C660D
4
Remove the four screws that secure the hinge covers to your notebook.
Screws Screws
5
Lift the hinge covers off the hinges.
6 7
Snap the new covers into place over the hinges, then replace the four screws. Reassemble your notebook.
32
www. gateway. com
Replacing the LCD panel assembly
Replacing the LCD panel assembly
Tools you need to complete this task:
Phillips #0 screwdriver
Flat-blade screwdriver
Screws removed during this task:
4 chrome 2. 5 × 5 mm (hinge covers)
4 or 6 chrome 2. 5 × 7 mm (LCD panel hinges)
To replace the LCD panel assembly:
1 2 3 4
Disconnect the power cord, remove the main and optional secondary battery, and prepare your notebook by following the instructions in "Preparing your work space" on page 3. If your notebook has 802. 11 wireless networking built in, remove the 802. 11 Mini PCI module by following the instructions in "Replacing the 802. 11 Mini PCI card" on page 13. Remove the keyboard cover by following the instructions in "Replacing the keyboard cover" on page 24. Remove the hinge covers by following the instructions in "Replacing the hinge covers" on page 31.
www. gateway. com
33
Replacing Components in Your Gateway SATELLITE C660D
5
Use a flat-blade screwdriver or chip puller to carefully unplug the LCD video cable from your notebook. Remove the keyboard cover by following the instructions in "Replacing the keyboard cover" on page 24. Remove the keyboard by following the instructions in "Replacing the keyboard" on page 26.
44
www. gateway. com
Replacing the cooling assembly
5 6 7 8
Remove the hinge covers by following the instructions in "Replacing the hinge covers" on page 31. Remove the LCD panel by following the instructions in "Replacing the LCD panel assembly" on page 33. Remove the palm rest assembly by following the instructions in "Replacing the palm rest assembly" on page 39. Unplug the cooling fan.
www. gateway. com
45
Replacing Components in Your Gateway SATELLITE C660D
9
Loosen the four captive screws that secure the cooling assembly to your notebook. (These screws cannot be removed. )
Captive screws
Captive screws
10
Lift the cooling assembly from your notebook.
46
www. gateway. com
Replacing the cooling assembly
11
Insert the new cooling assembly into your notebook, then tighten the four captive screws. Each screw hole has a numeral next to it.
Warning When tightening the cooling assembly's chrome screws into the numbered holes, tighten them in numerical order.
12 13
Plug in the cooling fan. Reassemble your notebook.
www. gateway. com
47
Replacing Components in Your Gateway SATELLITE C660D
Replacing the LED indicator panel
Tools you need to complete this task:
Phillips #0 screwdriver
Flat-blade screwdriver
Screws removed during this task:
5 chrome 2. 5 × 4 mm (keyboard)
4 chrome 2. 5 × 5 mm (hinge covers)
4 or 6 chrome 2. 5 × 7 mm (LCD panel hinges)
13 chrome 2. 5 × 5 mm (bottom)
4 chrome 2. 5 × 5 mm (back)
1 chrome 2. 5 × 7 mm (near touchpad) 1 chrome 2. 5 × 4 mm (near multifunction buttons) (palm rest)
1 chrome 2. 5 × 4 mm (LED indicator panel)
48
www. gateway. com
Replacing the LED indicator panel
To replace the cooling assembly:
1 2 3 4 5 6 7 8
Disconnect the power cord, remove the main and optional secondary battery, and prepare your notebook by following the instructions in "Preparing your work space" on page 3. If your notebook has 802. 11 wireless networking built in, remove the Mini PCI module by following the instructions in "Replacing the 802. 11 Mini PCI card" on page 13. Remove the keyboard cover by following the instructions in "Replacing the keyboard cover" on page 24. Remove the keyboard by following the instructions in "Replacing the keyboard" on page 26. [. . . ] Remove the palm rest assembly by following the instructions in "Replacing the palm rest assembly" on page 39. Remove the eight screws that secure the speakers to your notebook.
Screws
52
www. gateway. com
Replacing the speakers
9
Move the left speaker out of the way, then unplug the connector for each speaker.
10
Use a flat-blade screwdriver to carefully pry open the metal tabs that secure the wires for the right speaker, then completely remove both speakers.
11 12
Lay the left speaker near the audio board and align the right speaker over its screw holes on your notebook. The left speaker should be attached to the connector furthest from you.
www. gateway. com
53
Replacing Components in Your Gateway SATELLITE C660D
13 14 15
Carefully thread the wires for the right speaker under the metal tabs, then press the tabs back down to secure the wires. Reassemble your notebook.
54
www. gateway. com
Replacing the audio board
Replacing the audio board
Tools you need to complete this task:
Phillips #0 screwdriver
Flat-blade screwdriver
Screws removed during this task:
5 chrome 2. 5 × 4 mm (keyboard)
4 chrome 2. 5 × 5 mm (hinge covers)
4 or 6 chrome 2. 5 × 7 mm (LCD panel hinges)
13 chrome 2. 5 × 5 mm (bottom)
4 chrome 2. 5 × 5 mm (back)
1 chrome 2. 5 × 7 mm (near touchpad) 1 chrome 2. 5 × 4 mm (near multifunction buttons) (palm rest)
4 chrome 2. 5 × 4 mm (left speaker)
1 chrome 2. 5 × 4 mm (audio board)
www. gateway. com
55
Replacing Components in Your Gateway SATELLITE C660D
To replace the audio board:
1 2 3 4 5 6 7 8
Disconnect the power cord, remove the main and optional secondary battery, and prepare your notebook by following the instructions in "Preparing your work space" on page 3. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE TOSHIBA SATELLITE C660D
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual TOSHIBA SATELLITE C660D will begin.