User manual TRICITY BIW1000W
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual TRICITY BIW1000W. We hope that this TRICITY BIW1000W user guide will be useful to you.
Manual abstract: user guide TRICITY BIW1000W
Detailed instructions for use are in the User's Guide.
[. . . ] OPERATING & INSTALLATION INSTRUCTIONS
WASHING MACHINE
BIW 1000W BIW 1200W
124971940
Important Safety Information
It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings. You MUST read them carefully before installing or using the appliance.
Installation
n n
Use
n n
n
n
n
n
n
This appliance is heavy. It is dangerous to alter the specifications or attempt to modify this product in any way. [. . . ] Wash at 50 °C 3 rinses Short spin
MIXED FABRICS
6
RINSE HOLD
2. 5 kg
60
QUICK Lightly soiled synthetic & or mixed fabrics COOL WASH
7
Wash at 30 °C 3 rinses Short spin 3 rinses, with fabric softener, if required Short spin 1 rinse, with fabric softener, if required Short spin Draining of water and short spin
RINSE HOLD
2. 5 kg
35
RINSES
Separate rinse cycle for hand washed items
8
RINSE HOLD
2. 5 kg
20
This programme can be CONDITIONER used for softening hand RINSE washed garments. SHORT SPIN Separate spin for synthetics and delicates
9
RINSE HOLD
2. 5 kg
9
10
2. 5 kg
5
Specially tested programme for wool WOOL WASH garments bearing the "Pure new wool, nonshrink, machine washable" label. DELICATES Delicate fabrics, for example curtains For emptying out the last rinse water in programmes with the Rinse Hold option.
11
Wash at 40 °C 3 rinses Short spin
RINSE HOLD
2 kg
50
12
Wash at 40 °C 3 rinses Short spin
RINSE HOLD
2. 5 kg
50
DRAIN
13
Draining of water
-
1
15
Maintenance and Cleaning
Before any maintenance or cleaning is carried out you must DISCONNECT the appliance from the electricity supply.
Cleaning the drawer recess
Having removed the drawer, use a small brush to clean the recess, ensuring that all washing powder residue is removed from the upper and lower part of the recess. Replace the drawer and run the rinse programme without any clothes in the drum.
Descaling
The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this separately from any laundry washing, and according to the softening powder manufacturer's instructions. This will help to prevent the formation of lime deposits.
After each wash
Leave the door open for a while. This helps to prevent mould and stagnant smells forming inside the appliance. Keeping the door open after a wash will also help to preserve the door seal.
P0038
Cleaning the filter
The water drain filter
A clean filter is important for the correct operating of the machine, and should therefore be cleaned after every washing programme. Open the filter door and place a container underneath to catch any spillage. If the filter is blocked and the machine is unable to drain you will need to drain the water manually from the machine at this stage. To do this, unhook the drain hose from the standpipe or sink and hold the end of the hose over a bowl on the floor. Repeat the procedure until water stops flowing out.
External cleaning
Clean the exterior cabinet of the appliance with soap and water only, and then dry thoroughly.
Cleaning the dispenser drawer
From time to time the washing powder and additive dispenser drawer should be cleaned. Remove the drawer by pressing the catch downwards and by pulling it out. To aid cleaning, the top part of the additive compartment should be removed.
C0023
C0027
P0011
P0132
16
Unscrew and remove the filter. Clean carefully under a fast running tap.
The dangers of freezing
If the machine is exposed to temperatures below 0°C, certain precautions should be taken. n Unhook the drain hose from the rear support and position the end of this hose and that of the inlet hoses in a bowl. n When you intend to start the machine up again, make sure that the room temperature is above 0°C.
P0133
P0040
Warning
When the appliance is in use and depending on the programme selected there can be hot water in the filter. Never remove the filter during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When replacing the filter, ensure it is securely retightened so as to stop leaks and young children being able to remove it.
The water inlet filters
If your water is very hard or contains traces of lime deposit, the water inlet filters may become clogged. Replace the filters and tighten up the inlet hoses.
P0041
17
Something Not Working
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Tricity Bendix Service Force Centre, please carry out the checks listed below. [. . . ] The appliance drain hose should hook into a standpipe, the hook in the drain hose is formed using the plastic "U-Piece" supplied. The standpipe should have an internal diameter of approximately 38mm (see diagram) thus ensuring there is an air break between the drain hose and standpipe.
Min. 30 cm. (12")
Important
Before connecting up the machine to new pipework or to pipework that has not been used for some time, run off a reasonable amount of water to flush out any debris that may have collected in the pipes.
1 38 mm. (1/2") diameter standpipe
P1040
25
Min. 60 cm. (23. 6")
Levelling
Level the washing machine by raising or lowering the feet. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE TRICITY BIW1000W
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual TRICITY BIW1000W will begin.