User manual VALEX SP-9217
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual VALEX SP-9217. We hope that this VALEX SP-9217 user guide will be useful to you.
Manual abstract: user guide VALEX SP-9217
Detailed instructions for use are in the User's Guide.
[. . . ] 2 Operating Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Final Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Testing and Inspection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Ball: ASTM A351-CF3M or A479 316/316L Wetted Path: CF3M / 316 stainless / 316L stainless. Non-Wetted: CF8M, 300-series stainless steel, vinyl (handle sleeve), tamper-evident ink (on bolt threads). Standard seats/seals: Reinforced Teflon (RTFE) seats, virgin Teflon (PTFE) seals. Other seat/seal materials are available.
Materials of Construction:
Internal Surface Roughness Wetted Path: Assembled Length Tolerance: Lubricant:
25 micro-inch maximum. Per brochure ± . 25" (± 6. 35mm) None
SP-9217 Rev. W, Page 2 of 8
4. 0
Operating Data: Temperature Range: -20°F to 350°F as dictated by standard seat/seal materials. Seat/seal materials other than standard may affect the working temperature range.
Maximum Working Pressure:
Temp (F) 1/4" 1" 15A 20 1000 0 1200 1000 100 1000 350 1100 0 11/2" 2" 20A 40A 800 800 800 0 Pressure (PSIG) 21/2" 4" 50A 80A 500 500 500 0 4. 5" 6" Maximum Working Pressure 100A (PTFE Seats / Seals ) 400 400 400 0 300 300 300 0
6" 100A 21/2" 4" (50A 80A) 11/2" 2" (20A 40A) 1/4" 1" (15A)
1000 900 800
Pressure (PSIG)
700 600 500 400 300 200 100 0 50 0 50 100 150 200 250
300
350
400
Temperature (°F)
Flow Coefficient Data:
Valve Size 1/4" X . 035" 3/8" X . 035" 1/2" X. 049" 3/4" X. 065" 1" X. 065" 1-1/2" X. 065" 2" X. 065" 2-1/2" X. 065" 3" X. 065" 4" X. 083" 6" X. 109" JIS 15A (5S) JIS 20A (5S) JIS 25A (5S) JIS 32A (5S) JIS 40A (5S) JIS 50A (5S) JIS 65A (5S) JIS 80A (5S) JIS 100A (5S)
1)
Ball Orifice (Inches) 0. 402 0. 402 0. 402 0. 620 0. 870 1. 370 1. 870 2. 370 2. 870 3. 834 5. 782 0. 870 1. 370 1. 370 1. 870 1. 870 2. 370 2. 870 3. 834 4. 335
Connection Orifice (Inches) 0. 180 0. 305 0. 402 0. 620 0. 870 1. 370 1. 870 2. 370 2. 870 3. 834 5. 782 0. 724 0. 941 1. 209 1. 551 1. 783 2. 252 2. 839 3. 343 4. 335
Cv
1
2. 9 9. 0 16. 3 41. 2 84. 9 223. 3 432. 3 714. 4 1071. 2 1975. 3 4697. 8 57. 4 100. 4 171. 1 290. 7 391. 0 641. 1 1046. 5 1478. 4 2559. 3
Flow coefficient data calculated using methods described in Crane Technical Paper TP-410.
SP-9217 Rev. W, Page 3 of 8
5. 0
Final Process: General: Neither ozone-depleting nor mercury-bearing compounds are used during the Valex processing or testing of any product. Class 100 per Federal Standard 209E and ISO 14644.
Clean-Room Certification: Component Cleaning (prior to assembly): Component Drying: (prior to assembly): Final Assembly: 6. 0 Testing and Inspection: Visual Inspection:
DI water.
Nitrogen flow. Pre-cleaned components are assembled in a Class 100 cleanroom.
Inspected for i. d. /o. d. defects and face quality as compared to the visual workmanship standards set by the Valex Library of Parts for this product line. surfaces are inspected under ultraviolet light for absence of hydrocarbon fluorescence using a clean, lint-free cloth per CGA G-4. 1. The same cloth is then evaluated under a white light for cleanliness against visual workmanship standards for this product line.
Surface Roughness Measurement:
Flow path i. d. surfaces are measured with a stylus-type measuring device in accordance with ASME B46. 1 for conformance to the roughness as specified in sections 3. 0 and 9. 0. Assemblies are inspected for conformance to tolerances specified in this specification. Assembled valves are leak tested at Valex to 1 x 10-6 atm·cc/sec. Note: Valex does not guarantee leak rates for valves rebuilt outside Valex facilities.
Dimensional Inspection: Leak Test:
Body Pressure Test:
Valve bodies are hydrostatically pressure tested to 1. 5 times the working pressure given in section 4. 0 per 0. 4 AQL sampling.
7. 0
Packaging: Capping: Face-Seal Purge Port: Nickel gasket with metal threaded cap. Compression purge port: Standard Option: Vinyl cap over metal threaded nut. [. . . ] Please contact Valex for availability.
ASTM INCH SIZES
S - SHC 32 M - 16 M X R - E B
Material S = 316LSS Assembly Pattern STR = straight DHC = double horizontal cross SHC = single horizontal cross DHT = double horizontal tee DVT = double vertical tee DAV = double angle valve DSS = double single sided Main Tube Size 04 = 1/4" o. d. x . 109" wall Main Tube Connections C = compression fitting inlet and outlet F = face-seal fixed male inlet and outlet G = tube buttweld inlet, face-seal fixed male outlet H = compression fitting inlet, tube buttweld outlet J = tube buttweld inlet, compression fitting outlet K = face-seal fixed male inlet, tube buttweld outlet M = tube buttweld inlet and outlet Branch Valve(s) Outlet Size X X = no branch valve(s) 16 = 1" 04 = 1/4" 24 = 1-1/2" 06 = 3/8" 32 = 2" 08 = 1/2" (. 049w) 40 = 2-1/2" B8 = 1/2" (. 065w) 48 = 3" 12 = 3/4" 64 = 4"
Handle Sleeve Color B = blue P = purple D = gold R = red G = green S = silver I = pink W = white K = black Y = yellow Section 9. 0 Identifier E = 10 Ra electropolished / no lube L = 10 Ra electropolished / oxygen-compatible lube M = 180grit or 25Ra / no lube N = 20 Ra mechanical polished / no lube P = 20 Ra mechanical polished / oxygen-compatible Outlet Purge Port* X = no purge port C = compression fitting D = purge drill (open to atmosphere) P = compression fitting w/ plug S = face seal (swivel male nut w/hex) T = purge tube (open to atmosphere) V = purge valve w/ compression fitting Inlet Purge Port* X = no purge port C = compression fitting D = purge drill (open to atmosphere) P = compression fitting w/ plug S = face seal (swivel male nut w/hex) T = purge tube (open to atmosphere) V = purge valve w/ compression fitting Connection On Branch Valve(s) X = no branch valve M = tube buttweld C = compression fitting D = compression fitting w/expansion plate F = face-seal fixed male N = tube buttweld w/expansion plate P = compression fitting w/ plug
* Purge port sizes 1/4" purge port is used for valve sizes up to 2". 1/2" purge port is used for valve sizes larger than 2".
SP-9217 Rev. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE VALEX SP-9217
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual VALEX SP-9217 will begin.