User manual VELODYNE WIC-10 DATASHEET
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual VELODYNE WIC-10. We hope that this VELODYNE WIC-10 user guide will be useful to you.
You may also download the following manuals related to this product:
VELODYNE WIC-10 REV B (937 ko)
VELODYNE WIC-10 DETAIL SHEET (799 ko)
Manual abstract: user guide VELODYNE WIC-10DATASHEET
Detailed instructions for use are in the User's Guide.
[. . . ] No user-serviceable
The following conditions require service by a qualified technician: 1. The unit does not appear to operate normally or exhibits a marked change in performance. Some part of the cabinet or circuitry is physically damaged.
SPECIFICATIONS
Cabinet (H, W, D) (incl. feet and grill) Frequency Response (+/-3 dB) Harmonic Distortion High Pass Crossover
The lighting flash with arrowhead symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] If unit has been running at high levels for an extended period of time, one of the protection circuits may be engaged. · Is your power line voltage sagging below acceptable levels?
If the protection circuitry is active, the unit may cycle on and off until operating parameters return to normal. Normal operation should return upon cooling, but you may be required to turn the power off and then on again to reset the unit.
13
2
IMPORTANTES CONSIGNES DE SECURITE
ATTENTION
Risque d'électrocution Ne pas ouvrir
Attention: Afin d'éviter tout risque d'électrocution, ne pas enlever le boitier (ou partie arrière de l'enceinte). Aucune pièce ne doit être manipulée par l'utilisateur. Pour tout entretien, vous référer à un personnel de service qualifié. Le symbol de l'éclair avec la flèche sert à avertir l'utilisateur de la présence d'un "voltage dangereux" non isolé dans l'enceinte du produit d'une magnitude pouvant constituer un risque d'électrocution de personnes. Le symbol du point d'exclamation sert à avertir l'utilisateur que d'importants conseils de fonctionnement et de maintenance (entretien) sont fournis avec l'enceinte d'extrêmes graves.
1. Lire le mode d'emploi - Tous les conseils de sécurité et de fonctionnement doivent être lus avant de mettre en marche l'enceinte. Garder le mode d'emploi - Il est conseillé de conserver les conseils de sécurité et de fonctionnement pour un éventuel usage futur. Avertissements - Il est important de se conformer à tous les conseils de fonctionnement concernant l'enceinte et à toutes les instructions inscrites sur l'enceinte. Suivre les conseils - Tous les conseils d'utilisation et de fonctionnement doivent être suivis à la règle. Remove all staples used to seal the carton as they can scratch the cabinet. Packing this unit in any other carton may result in severe damage when shipping. Record the serial number in the space provided on the warranty card for future reference.
Interconnect Cables
When installing your new Velodyne subwoofer using the line level connections, you should always use shielded phono cables. There are many decent cables available today, most any of which will work perfectly well. We do recommend that you keep the length of cable as short as possible to avoid any potential noise problems. When using speaker level connections, use a decent quality speaker cable that mates well with the connectors. Be very careful to avoid any loose strands or frayed wires which may result in a short, which may damage your equipment. Extremely large gauge wire may not properly fit in the binding posts, resulting in a poor connection and possible short circuits.
Care of Your Subwoofer
Your Velodyne subwoofer does not require any regular maintenance. Normal dusting or cleaning of the surface for appearance purposes are all that is required. We suggest you avoid any harsh detergents or chemicals when cleaning the cabinet. Abrasives, detergents, or cleaning solutions may damage the finish on the cabinet. [. . . ] Low-pass crossover - 40 to 120Hz All inputs sum the left and right channels together, with the resulting signal passing through an adjustable low-pass crossover before being amplified. The crossover control allows you to adjust the upper limit of the subwoofer's frequency response from 40 to 120Hz. The subwoofer's response will begin rolling off above the frequency you set this control to. You should set the crossover frequency to obtain a smooth and seamless transition from the subwoofer to the main speakers in your system. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE VELODYNE WIC-10
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual VELODYNE WIC-10 will begin.