User manual VIETA IP10B DATASHEET

[. . . ] 2dB ! Note: Specifications are subject to change for improvements. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. 1 10 OPERATION IMPORTANT SAFEGUARDS A. Before turning on the system, please connect it according to the System Connection Instruction. [. . . ] Press on the POWER switch button on the Rear Panel of the main unit to switch on the system, the standby indicator will light up. Then press the STANDBY button on the remote controller to enter The normal status. Press the button on the remote controller once again to keep power in standby status. Press the VOL+ turn-knob on the front panel of the main Unit or VOL + button on the remote controller to maximize the sound output. Press the VOL- turn-knob on the front panel of the main unit or VOL - button on the remote controller to minimize the sound output. Press the MUTE button on the remote controller once to keep the performance silent. RESET Press the RESET button on the remote controller and it will reset all settings including SW Speaker output, Front Speaker output , CENTER Speaker output, Surround Speaker output to Factory Default settings. Caution: Please read carefully all the following important safeguards to ensure safe operation. Do not defeat the safety purpose of the polarized or grounding type plug. If the provided plug does not fit into your outlet, consult and electrician for replacement of the obsolete outlet. Unplug this apparatus during lightning storms or when unused for long periods of time. 11. MUTE: Mute Function Button . Insert the batteries Insert two 1. 5V size AAA batteries into the compartment of the remote control. Make sure the polarity of the battery must be complying with which on the compartment. Please put out the batteries from the compartment when you do not use it for long extent of time. Effective scope of the remote control The remote control is effective in a scope, which is less than 7 meters, and in an angel of 30 degrees from the remote control to the receiver in the center speaker. [. . . ] Please put out the batteries from the compartment when you do not use it for long extent of time. Effective scope of the remote control The remote control is effective in a scope, which is less than 7 meters, and in an angel of 30 degrees from the remote control to the receiver in the center speaker. Notice: Do not put the remote control and the signal receiver under strong light. Do not place any barrier between the remote control and the receiver. [. . . ]