User manual VIETA IP2BL DATASHEET

[. . . ] To prevent direct exposure to laser beam, do not try to open the enclosure. Visible and invisible laser radiation when open and interlocks defeated. Do not stare into beam This appliance is classified as a LASER KLASSE 1. To ensure continued safety, do not remove any cover or attempt to gain access to the inside of the product. LASER KLASSE 1 WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Caution: - Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure. [. . . ] It will change the video signal of a NTSC disc and output in PAL format. * Video Out Video out selection enable you to choose the type of video out put suitable for your receiver. PR PB Y Select PR PB Y, if you have connected the video output to your TV using S-VIDEO jack. SCART Select SCART, if you have connected the video output to your TV using the Scart jack. * Screen Saver If set to ON, when you leave the system in stop or pause mode for more than one minute, the screen saver will be activated. Press ENTER to confirm a highlighted selection. To exit setup menu, press MENU. Setting the picture * TV Shape Select the aspect ratio of the TV to be connected. 4:3 PS (default setting) If you have a conventional TV set and your DVD is not formatted for widescreen viewing, use this setting. A wide picture is displayed on the whole TV screen with a portion automatically cut off. 4:3 LB If you have a conventional TV set and your DVD is formatted for wide screen viewing, use this setting. Wide bands will be displayed on the upper and whole portions of the TV screen. 16:9 If you have a widescreen TV set, use this setting (you must also set your widescreen TV to "full size"). Setting the sound 16:9 (Wide screen) 4:3 LB (Letter Box) * Digital Output Digital output selection enables you to specify the type of digital output suitable for your amplifier or receiver. Dolby ProLogic Surround The Dolby ProLogic Surround system is a specially encoded two channel analogue format that will produce sound through four speaker channels (front left, center, front right, mono surround) when a Dolby ProLogic Decoder is used. It is also compatible with stereo systems but the user will stereo system but the user will only have two channels (front left and right of sound). Dimming the display screen 1 Select from the menu bar and press key to select different levels of brightness for the display screen: HIGH, MID or LOW. Sleep timer setting Select in the menu bar and press ON or PBC OFF. key to select PBC The sleep timer enables the system to switch to standby mode automatically at a present time. 1 2 Select from the menu bar and press key repeatedly to select a present time. To cancel the sleep timer Press key repeatedly until the "OFF" appears. When playing a disc with PBC function Select in the menu bar and press key to select PBC ON or PBC OFF. If "PBC OFF", press play key and the system will start playback automatically. If "PBC ON", the PBC menu (if available) will appear on the TV screen for selection. Note If PBC mode is switched on, TIME SEARCH and REPEAT functions are not available. Program play You can play the contents of the disc in the order you want by programming the order of the tracks to be played. 2 3 4 5 6 Use the number keys (0~9) to input the track number in the order you want. " is If you attempt to program more than 99 tracks, " displayed. To cancel the program, press again. 12 Care and Maintenance Cleaning the components Before cleaning, switch off the DVD receiver. [. . . ] If you still experience problems after checking your connections, please try connecting your DVD system directly to your TV S-Video input, if your TV is equipped with this input. No color in the picture l The disc format is not according to the Td (PAL/NTSC) l Ensure DVD player is not connected through VCR. Severe hum or noise is hear l Check that the speaker and components are connected securely. l Check that the connecting cords are away from a transformer or motor, and at least 3 meters away from a TV set or fluorescent light. [. . . ]