User manual VIETA IP2R DATASHEET

[. . . ] Do not install near any heat sources such as radiators, heat registers, stoves, or otherapparatus(including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinch particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. [. . . ] The default setting is STEREO. · WIDE If you have a widescreen TV set, use this setting (you must also set your widescreen TV to "full size") · LT/RT(LEFT TOTAL/ RIGHT TOTAL) A two-channel delivery format for Dolby surround four channels ( audio left, center, right and surround ) are matrix encoded two channels. STEREO All sound is reproduced and played through the front left and right speakers. This enables standard stereo reproduction. Selecting the TV SYSTEM This function allows you to select the color system matching the connected TV set. Option:PAL, NTSC, MULT. · Note · LT: Only matrix encoded audio left, center, and surround RT: Only matrix encoded audio right center and surround. 10 Basic Setup Audio setup Digital output setup Select the preferred language for audio. -- AUDIO SETUP -AUDIO OUTPUT COMPRESSION SPDIF/RAW SPDIF/PCM ANALOG Audio setup Selecting the dynamic range In many listening situations, it is objectionable to allow the sound to become very loud, and thus the loudest sounds must be compressed downwards in level. Likewise, the very quiet sounds would be inaudible and must be brought upwards in level to be heard. Dolby Digital satisfies these needs through the dynamic range controlling. Selects the dynamic range compression to fit the individual listening situation of the audience. The default setting is OFF. MAIN PAGE AUDIO RELATED · · · · · FULL: Audio with fully compressed dynamic range. 7/8~1/8: Audio with partially compressed dynamic range. OFF: Audio with uncompressed dynamic range. The default setting is SPDIF/ PCM · Notes The Dual Mono and Dynamic Range settings only support Dolby Digital programs. The higher the setting selected will result in audio with a more fully compressed dynamic range. · · SPDIF/ RAW If the optical or coaxial output on the rear panel is connected with a receiver built-in Dolby Digital, DTS or MPEG decoder, select this item. Refer to the instructions or liner notes that are included with each disc to determine what features and operations are available on that particular disc. Turn your television set' s power on, and set the channel to the video input. Press POWER on the front panel to turn on the main power of this system. The front panel display lights up, and the DVD logo screen appears on the television screen. Note · Load the disc placing the label side face up, and using the disc tray as a guide for proper alignment. When playing a double-sided DVD disc, load it with the desired playing side face down. Use the master VOLUME (+/-) buttons to increase or decrease the volume level. To interrupt or pause play2 Basic playback For VCD / CD discs FF(fast forward) : FFX1 --> FFX2 --> FFX3 --> FFX4 --> PLAY FR(fast reverse) : FRX1 --> FRX2 --> FRX3 -->FRX4->PALY To resume normal play, press PLAY/PAUSE /ll. . Slow motion playback To view playback in slow-motion, press SLOW on the remote control unit during playback. When playing DVD discs: Press SLOW repeatedly to select the slow motion speed and direction as follows: SF ( slow forward) , SR (slow reverse) . SFX4 SFX8 SRX2 SRX4 SFX2 SLOW OFF. SRX8 When playing CVD, SVCD or VCD discs: Press SLOW repeatedly to select the slow motion speed as follows: SFX2 SFX3 SLOW OFF. · On some discs, the slow-motion playback function is not available. [. . . ] The angles cannot be changed when you play a DVD · Multi-angles are not recorded on the DVD. · Change the angles when the angle mark appears on the TV screen. The system does not operate properly · Static electricity, etc. , may affect the system's operation. Press the POWER button to turn off, then press again to turn on. The aspect ratio of the screen cannot be changed even though you set "TV DISPLAY" in the SETUP menu when you play a wide picture. [. . . ]