User manual VIETA VPC47IP

[. . . ] INSTALLATION Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and system work properly. Use only the parts included with the unit to ensure proper installation. Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle. Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a sudden stop, like an emergency stop. [. . . ] Press Mode button to select mode . The unit will display for a while then starts The files contained on the Memory Card. Once the unit read the MEMORY CARD successfully, the first audio music file on the Memory Card will automatically start playback. Press Mode button repeatedly is allowing changing to other modes or switch back to mode. Music File Playback Operation All the SD or MMC Memory Card playback operation function is same as the operation on MP3/WMA. Please refer to 'MP3/WMA Operation' for more details. E - 21 14. MUSIC FILES TRANSFERRING Thanks for the most useful and convenient files transferring function of this unit, user can easily transfer music files between USB Stick, SD or MMC Memory card. Please read below for the details operation of this function: TRANSFERABLE MEDIA Files are transferable within the following media: Removable USB Stick SD Memory Card MMC Memory Card MUSIC FORMAT SUPPORTED BY FILE TRANSFER ARE MP3 and WMA TRANSFER MP3 OR WMA MUSIC FILES This operation only can be performed during file playing a MP3 or WMA music file. 1. Playback a music file to be transferred and then long press the COPY / RECORD button to activate the Transfer mode. 2. The LCD will display as default, Rotate the encoder volume knob to navigate thru > for selection of the storage media. Once selected the storage media, Press AUDIO button as confirmation to transfer the Playing file. If no further button is press within a 10 second time out, the unit will automatically resume to the previous mode 4. If the unit detected the selected media memory capacity is used up, Will be displayed on the LCD for a while then automatically resume to the previous mode. 5. After pressing AUDIO button to start the transfer, the playing music file will stop and the transferring will start at the same time. (The following step is an example of if selected USB) 6. When the transfer is processing, the LCD will displayed . 7. When the file transfer is completed, the LCD will display for a while and automatically playback the present music file which have been transferred. The transferred music file is automatically saved as a file into Folder "MY_MP3" or " MY_WMA" by the advance "File Management. " system of this unit. Tips For more details information of File Management system of this unit. Under transferring mode, All the MP3/WMA operation is not functional, like file up / down, Repeat, Random, and Intro etc. The audio will remain recording by the unit system even MUTE function is activated The Transferring will automatically stop if the storage device memory is less than 2MB To Cancel Transferring. The LCD will display The music file that has been transferred incompletely will be deleted. The unit will stop the file transfer automatically under the following operation, the music file that has been transferred incompletely will be deleted. 1)Switch the power to off mode 2)Mode change 3)Inserting a USB Stick 4)Detach the Front Panel from the main unit E -22 TRANSFER MP3 OR WMA MUSIC FILES BETWEEN MEDIA DEVICES Select a device by mode button and playback the music file need to be transfer: 1. Long press the COPY / RECORD button to activate the transfer mode. 2. The LCD will display as default, Rotate the encoder volume knob to navigate thru > for selection of the storage media. [. . . ] For the details operation of connecting with this unit, Please refer to the CONNECTING operation for more details. (2) Press MODE button repeatedly until "BT AUDIO" appears on the display. IMPORTANT: To listen Bluetooth audio streaming from the audio device, user MUST change the mode to "BT AUDIO" first. Any other mode of this unit is not able to activate the Bluetooth audio streaming ( A2DP ) function. [. . . ]