User manual VIETA VPD-1256

[. . . ] Doctors point out the risk of listening to loud sound for a long time. If you feel echoing in your ears, reduce the volume or stop using the earphone. If you use the charger, malfunction can occur and cause serious noise, which can injure your hearing sense. Do not put the magnetic materials such as a cash card close to the microphone. [. . . ] The available recording time is displayed while recording. 3 Press the MENU button again to save the setting. 25 Setting the Resume function If you stop playback by pressing the REC/STOP button during playback and start playback again, the playback will be resumed from the last played position. 1 After pressing the MENU button in the Playback or Stop mode, select the RESUME using the REW/FF button. 2 Select the ON or OFF using the REW/FF button. · The Playback will be resumed the last playback position. The Playback will be resumed the last playback position. The Playback will be started from the beginning. To cancel the resume setting, press the PLAY/STOP button or select the "RESUME OFF". 3 Press the MENU button again to save the setting. Note: · When the Resume is set to "on", you can stop playback and select the other track using REW/FF button to playback from the beginning of the selected track. 26 Setting the Hearing Aid You can listen to natural sound more clearly with earphone at the STAND-BY mode. 1 After pressing the MENU button in the Playback or Stop mode, select the Hearing aid using the REW/FF button then pressing the MENU button. 2 Select the On or Off mode using the REW/FF button. · It can work in ONLY STAND-BY mode 3 Press the MENU button again to save the setting. · To set free from Hearing aid, press the PLAY/STOP button 27 Setting the Microphone sensitivity You can set the Microphone sensitivity base on your environmental situation, such as the distance of sound source to microphone and noisy level. 1 After pressing the MENU button in the Playback or Stop mode, select the MIC SENSE using the REW/FF button then pressing the MENU button. · You can see Setting the Microphone sensitivity section. 2 Select the Microphone sensitivity using the REW/FF button. MIC LOW Select MIC LOW when the sound source is on short distance or noisy level is high. MIC HIGH Select MIC HIGH when the sound source is on long distance or noisy level is low. 3 Press the MENU button again to save the setting 28 Checking the memory You can check the available memory in the Playback or Stop mode. 1 After pressing the MENU button in the Playback or Stop mode, check the available free memory using the REW/FF button. 2 Press the MENU button again to see the remaining memory compared with the total memory. 29 Setting menu (when the recording folder is selected) 1 Select the VR mode while the power is turned on by pressing the REC/STOP button. 2 Press the folder button to select the fonder that will save the file to record among A, B, C or D. 3 Press the MENU button in the Playback or Stop mode and move to the intended function using the REW/FF button. · The REC MODE REPEAT LCD light DISPLAY RESUME HEARING_AID MIC_SENSE FREE MEMORY will be displayed. · After setting the function, press the MENU button to move to the next menu. · If you don't input anything for 5 seconds in the Menu mode while the player is playing back or paused, the Menu mode will be released. Note: · Refer to the "Setting My Option (when the recording folder is selected)" for more information on the repetition function, LCD light, display, resume function and memory check. 30 Setting My Option (when the recording folder is selected) Setting the REC mode You can select the recording quality ­ HQ, SQ or LQ. You can also set the recording time depending on the recording quality. 1 After pressing the MENU button in the Playback or Stop mode, select the REC MODE using the REW/FF button. · The player will enter the Sound setting mode. 2 Select the recording quality you want using the REW/FF button. High quality mode Standard mode Recording time Long hour mode 3 Press the MENU button again to save the setting. 31 Listening to FM radio Push REC/STOP button to the FM direction while the power is turned on. If you select the FM Radio mode, the frequency of last selected will be set automatically. Tuning and saving the station frequency To tune and save the station manually 1 Press the MENU button. · The player will enter the Radio mode. 2 Press the MENU button again to select the "FREQUENCY MODE" using the REW/FF button and press the MENU button. · The manual frequency channel setting mode will be selected. 3 Select the frequency manually by pulling the REW/FF button shortly. ·If you pull the REW/FF button longer than a second, the radio broadcasting frequency will be automatically scanned. 4 After selecting the frequency to save, press the play/stop button. · The channel number will blink. 5 Select the channel number to save using the REW/FF button and save it by the PLAY/STOP button. · Save other broadcasting frequency using the same method as described above. 32 To set and save the station automatically Only the identifiable frequency will beset in the area that receives weak frequency. 1 Press the MENU button. · The player will enter the Radio mode. 2 Press the MENU button again to select the "AUTO SAVE MODE" using the REW/FF button and press the MENU button. · Radio broadcasting frequencies that can be received will be scanned automatically and saved in the CH01 ~ CH20. 33 Listening to radio with saved frequency 1 Press the MENU button. · The player will enter the Radio mode. 2 Press the MENU button again to select the "PRESET MODE " using the REW/FF button and press the MENU button. · The manual frequency channel setting mode will be selected 3 Pull the REW/FF button shortly and find the saved channel. · If you pull the REW/FF button for a long time in the PRESET mode, you can search the broadcasting frequency manually since the mode is changed to the "FREQUENCY MODE". Note: · When you listen FM Radio using built-in speaker, the supported antenna must be plugged in on era phone terminal (phone) in the set. · If the supported antenna or ear phone is not plugged in on the set when listing FM Radio, some noise may be seriously affected. 34 Deleting saved frequency Deleting one Frequency channel 1 Press the MENU Button and press the MENU button again to select the "CH_ERASE MODE" using the REW/FF button. · The "CH ERASE MODE" will be selected. 2 Pull the REW/FF button shortly and find the saved preset channels. · The deleted preset channel will be selected. 3 Select the "Preset YES" using the REW/TT button and press the MENU button. [. . . ] 17. 5(D)mm 41. 5g (excluding the battery) DC 1. 5V, battery (Size "AAA"LR03) 2 ea. VOICE/MP3 earphone play: About 14 hours (Vol 15) Internal flash memory 6mW-2ch MP3: 20Hz ~20kHz Voice: 300Hz ~3kHz Radio: 87. 5MHz ~108MHz PC Interface Input Internal External Output Operational Conditions Accessories Basic Items USB (Universal Serial Bus) Internal non-directional condenser microphone Plug-in condenser microphone Earphone (Stereo 16 . )/Speaker (8 . , 300mW) Temperature 0°C ~ 40°C AAA size batteries 2, earphone, USB connection cable, program installation CD, user's manual/warranty, necklace string Optional Items External microphone, Antenna, external device connection cable, phone recording adaptor and phone connection cord. 52 MEMO 53 FCC note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ]