User manual VIOLET DESIGN PEARL DESCRIPTION

[. . . ] The Pearl Standard uses a medium single-diaphragm transducer which provides a modern, detailed vocal sound with airy highs, extended vocal presence and optimized low-end response. [. . . ] The Pearl Standard uses a medium single-diaphragm transducer which provides a modern, detailed vocal sound with airy highs, extended vocal presence and optimized low-end response. A soft center band around the circumference of the head minimizes shock and handling noise. Rugged microphone construction and internal shockmounts effectively reduce stand rumble, outside infrasonic interference and mechanical shocks. In vocal applications, best results are obtained when the microphone is 1" to 6" away. Microphone overload is not a problem, however, we recommend the use an additional pop filter in the studio or a foam windscreen in live applications for further protection from plosive sounds and breath, pop or wind noise. SPECIFICATIONS FREQUENCY CHART: THE PEARL STANDARD +8 Transducer type: electrostatic Operating principle: pressure gradient Diaphragm's active diameter: 0. 5" (14mm) db O Frequency range: 20 Hz to 20 kHz Polar pattern: cardioid -8 20 30 50 Output impedance: 50 ohms Rated load impedance: 1000 ohms Suggested load impedance: > 500 ohms Sensitivity at 1000 Hz into 1000 ohms load: 10 mV/Pa S/N Ratio (CCIR 468-3 weighted): 71 dB S/N Ratio (DIN/IEC 651 A-weighted): 82 dB-A Equivalent noise level DIN/IEC A-weighted: 12 dB-A Maximum SPL for 0. 5% THD at 1000 ohm load: 140 dB Dynamic range of the microphone preamplifier: 128 dB Phantom power voltage on pins 2 & 3 of XLR: 48V (±4V) Phantom current consumption: < 2 mA Output connector: 3-pin XLR male Signal polarity: pin 2 in phase Dimensions & Weight: 8. 15" (h) x 1. 67" (w) / 5. 5 oz. ( 207 x 42. 5mm / 250g) Included accessories: stand holder, solid hardwood box Options: PSM shockmount, GSM compact shockmount, FRR reflection ring 70 70 200 300 500 700 1K Hz 2K 3K 5K 7K 10K 20K Exclusively distributed in the Americas by 9770 Silicon Prairie Pkwy · Madison, WI 53593 USA tel: 608-227-2040 · fax: 608-831-1890 violetusa. com [. . . ] Microphone overload is not a problem, however, we recommend the use an additional pop filter in the studio or a foam windscreen in live applications for further protection from plosive sounds and breath, pop or wind noise. SPECIFICATIONS FREQUENCY CHART: THE PEARL STANDARD +8 Transducer type: electrostatic Operating principle: pressure gradient Diaphragm's active diameter: 0. 5" (14mm) db O Frequency range: 20 Hz to 20 kHz Polar pattern: cardioid -8 20 30 50 Output impedance: 50 ohms Rated load impedance: 1000 ohms Suggested load impedance: > 500 ohms Sensitivity at 1000 Hz into 1000 ohms load: 10 mV/Pa S/N Ratio (CCIR 468-3 weighted): 71 dB S/N Ratio (DIN/IEC 651 A-weighted): 82 dB-A Equivalent noise level DIN/IEC A-weighted: 12 dB-A Maximum SPL for 0. 5% THD at 1000 ohm load: 140 dB Dynamic range of the microphone preamplifier: 128 dB Phantom power voltage on pins 2 & 3 of XLR: 48V (±4V) Phantom current consumption: < 2 mA Output connector: 3-pin XLR male Signal polarity: pin 2 in phase Dimensions & Weight: 8. 15" (h) x 1. 67" (w) / 5. 5 oz. [. . . ]