User manual XORO HRT 7620

[. . . ] 21 English 3 SAFETY INFORMATION The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user of the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. English The exclamation point within an equilateral triangle is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. user Manual  π All the safety and operating instructions should be read before the product is operated.  π Retain instructions - The safety and operating instructions should be retained for future reference. [. . . ] In addition to information such as TV program title, date and time, current time, runtime of the current program, resolution of the program (for example, 576i) and whether teletext is available, EPG information about the current program is also displayed. More detailed EPG information on individual programs can be found in the electronic program overview (page 13). 12 DAILY OPERATION Program List Press the OK button during the TV program list is displayed. With the navigation buttons ▲ / ▼ you can select a station within the program list and call it up with the OK button. English Favorites List Press the FAV button while watching TV, the favorite list is displayed. With the navigation buttons ▲ / ▼, you can select a station within the favorites list and call it up with the OK button. EPG (Electronic Program Guide) Press the EPG key to display the electronic program guide (EPG). Use the / buttons to select between the station overview (SENDER) or the detail view of the selected station (DETAIL) if the uppermost field is highlighted in yellow after pressing the INDEX button. You can now press the ▼ button in the box below, depending on the selection, set the day for the display (SENDER) or change the program for the detail view (DETAIL). By pressing the ▼ key, you will be taken to the respective overview. Use the navigation buttons ▲ / ▼ to select an event within the view. The following keys and functions are available: Green button Yellow button Blue button Index OK Shows information about the selected event Displays a list of all programmed timers (page 14) Programs a reminder timer (page 14) Changes the EPG view (see above) Ends EPG and returns to the current program Notes:  The extent to which program information is available in the EPG depends on the particular TV station.  You may need to switch to a station first to see its program information in the EPG views.  EPG is not available for analog TV signals 13 DAILY OPERATION The device offers a recording function on connected USB 2. Finished recordings can be played in the media player of the respective recording medium (page 19). English Instant Recording While watching TV, press the REC button and recording will start. During recording, the time left on the top left of the screen is shown for how long the recording has been in progress. You can view finished recordings in the media player of the recording medium (page 19). During an ongoing recording, it is technically not possible to change the station or to watch another station. At the same time, the TV automatically switches on the TV set to the programmed event on time or to the stored station. In the detailed view of the desired station, select the program to be recorded and press the blue button. In the now appearing window "Reminder", the start time of the scheduled program is taken over from the sender EPG. [. . . ]  If the TV restarts unexpectedly with the USB storage device inserted, the connected USB storage device requires too much inrush current and does not comply with the USB 2. In the event of overvoltages or voltage fluctuations at the antenna input, the TV may respond with a restart and display the initial installation.  Check your reception system for possible faults or short circuits.  If you have problems with the sorting of the station list and your station list changes independently or the channel numbers are not displayed continuously, check if the LCN function is activated! [. . . ]