User manual XORO HTC XX29D

[. . . ] Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user of the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. All the safety and operating instructions should be read before the product is operated. Retain Instructions - The safety and operating instructions should be retained for future reference. [. . . ] Unit may require longer time to format depending on the volume of the USB device. Even when they are in a supported format, some files may not play or display depending on the content. After the disk format is finished, the menu as shown on the right will appear. The item Time Shift Size is highlighted, press the button to choose a size to be allocate for time shift. Speed, Remain Space Once USB device is checked, this item will display the USB data transfer rate and the remaining space in it. Max record time Press the button to select Max record time and press the button select desired time as the max record time. Recording program After you setup the settings on the PVR File System menu, you can record a DTV program on the external USB device. select the desired program then press the REC button on the remote control to start recording and the progress bar will be displayed. Press the REC button again, an REC icon will blink on the bottom right corner of the screen and it will fade out in 10 seconds. Recording stops when you press the STOP button and the recorded file is stored in the external USB device automatically. Recording in standby mode This unit is able to do recording while in sleep mode. While recording in standby mode, unit will not output any picture or sound. The power indicator will flash in green and red consecutively while there is a recording in standby mode. Schedule Recording by EPG Schedule record is a function which allows you to record future program. You can first set up a schedule record, then unit will record the program when the program is broadcast. Select your desired TV program and press the REC button to enter the Recorder menu. From here you can modify the start and end date time of your record schedule by using the direction button once. You can schedule more recordings and the scheduled programs will be listed in the Recorded Schedule List. While in Recorder menu, you can also press the green button to enter the Recorded Schedule List. Time Shift Function This function allows you to pause and fast forward/rewind normal Live DTV viewing at any time without missing any of the live broadcast, provide that a USB storage device is connected. Press the PLAY (>||) button to continue playing the program from the point where it was paused. Time shift function stops when the current save time becomes 00:00:00. [. . . ] Password Move the cursor the PASSWORD item and press OK button to confirm and then input the secret code "0 0 0 0" (if it is the first use). After confirmation, you are required to input new secret code and then press OK button to confirm. Warning: Please remember the new secret code, otherwise you will not be able to change the parental control. Please contact the agent or our company if you forget the secret code. [. . . ]